We recommend placing Adirondack chairs at least two to three feet apart. You will also want to have three to four feet of space in front of an Adirondack chair to make it easy to get into and out of. A patio or porch around 10 feet square can comfortably hold three to four Adirondack chairs.
Outdoor seating, including dining chairs, benches, Adirondack chairs and gliders should be provided to give employees a place to sit and enjoy their break or relax during a meeting. Like outdoor tables, most outdoor seating options are made of treated wood, metal or plastic, allowing them to resist damage commonly caused by the elements like rain and sun damage.
One concern I have is the slope of the seat. Chair with less of a slope are easier to get out of. Also, the height o the chair can be problematic for the same reason. I would be interested in info on chairs that have less of a slope and higher off the ground. Any suggestions?
Hi Jose! Thank you for reaching out to us! We would recommend our traditional style adirondack chairs because they will provide you with a lower seat height. I have included the links to some suggestions below.
I have a chair set that is connected by a table between the two chairs. Each chair has an extended footrest that folds up and recesses under the char when the footrest is slid into the closed position. The issue is that, the footrest when in place and fully extended has five inch legs which when used slants down at an angle that I find uncomfortable. I was wondering if I could order longer legs that will keep the footrest at more of a level position with the chair seat of the chair when extended.
You can see the following links to check each one and see what you think: -curveback-adirondack-chair-ad600.html -curveback-adirondack-chair-ad610.html -curveback-adirondack-chair-ad620.html
Deane Biermeier is an expert contractor with nearly 30 years of experience in all types of home repair, maintenance, and remodeling. He is a certified lead carpenter and also holds a certification from the EPA. Deane is a member of The Spruce's Home Improvement Review Board.
Our top pick for Adirondack chairs is the Highwood Hamilton Made in the USA Adirondack Chair. This chair is made from high-grade poly lumber and has three reclining positions for ultimate comfort outdoors. For a more affordable option, we recommend the RealComfort Charcoal Resin Plastic Adirondack Chair, which features built-in lumbar support and is lightweight for easy mobility throughout your lawn and home.
Whether you like the traditional knot and burls look of knotted cedarwood or bright colours available through our Poly-Luxe line, we have an Adirondack chair for you. Our chairs are completely customizable. Get yours in the texture and colour you prefer. We offer additions such as ottomans and coffee tables and sell our chairs in sets.
Our chairs come in three sizes - the Classic, the Royal, and the Grand. All three are foldable. The Grand is our widest chair and is suitable for larger individuals. The Royal is our bestseller. Slightly wider than the Classic and flatter, it is the easiest chair to get in and out of.
The Canadian version of the Adirondack chair is called the Muskoka chair, found mostly in Ontario and Quebec. The Adirondack chair was created in the Adirondack mountains. Americans brought their chairs to the Muskokas for cottage season. There, it was adopted and manufactured under a new name. Muskoka chairs are almost indistinguishable from Adirondack chairs.
"Adirondack chairs are a unique blend of art and function," says Brady Maller, executive vice president of strategy and sales for POLYWOOD Furniture, by email. An Indiana company that was the first to create outdoor furniture from recycled plastic materials back in 1990, the company now processes more than 400,000 milk jugs each day into their product, including their Adirondack chairs.
Los Angeles interior designer John Linden adds that Adirondack chairs are often more comfortable than other types of lawn chairs because of their contoured design, making them easier to recline in, as well as allowing for the use of extra cushions and pillows.
The two most common materials for Adirondack chairs, depending on personal design preference and maintenance expectations? Wood and plastic lumber, according to Maller. "While the original Adirondack chair was a cedar wood plank design, the 1980s recycling movement and the birth of recycled plastic lumber has given consumers a wood alternative material for both long-term durability, and an array of low-maintenance colors," he says. "For the sustainable, eco-minded consumer, recycled plastic lumber provides a great choice."
"Adirondack chairs vary greatly in price, anywhere from $20 to $200," says Linden. "This is usually directly tied to the material you choose; the better the material, the longer the chair will last and the more comfortable it will be."
Why are they so expensive? Because not all Adirondack chairs are made equal, explains Maller. "Often, what looks like a more expensive option comes with generational no-hassle warranties, low maintenance and all-weather performance," he says. "These benefits, stretched over a lifetime, quickly become the best option as maintenance and replacement costs add up quickly on less expensive chairs."
Adds Linden: "Adirondack chairs, especially teak or aluminum, can last a lifetime after purchase with proper care. Aluminum is relatively easy to care for, as it is water- and rust-resistant, while teak furniture requires occasional treatment to prevent wear and color loss."
We have bought polywood chairs in past years and although they are nice chairs, they are also very expensive. They also get chalky over time. Hearing so much about Weathercraft, we ordered 4 commercial series chairs. OMG were we impressed. These chairs far exceed our expectations with a finish that is exceptional for much less cost. Gregory M. | Galveston TX. May 2021
We were utterly amazed finding these balcony height chairs to look over our balcony railing on the 5th floor. We can actually see over the rails up and down the beach w/o having to stand. LOVE THESE CHAIRS. Ross J. | Clearwater, FL Oct. 2020
While on vacation at the beach we fell for these chairs immediately. Weathercraft was easy to find online and we were so excited to order when we got back home. Now they are on our deck and poolside. Abby & Jon | New Jersey June 2017
Ordered 2 of the double seater chairs which exceeded all expectations. We then ordered 4 regular chairs this time with cushions. Again totally pleased. I must say to my surprise, these cushions make a surprising difference. Quality and Comfort A+. Mazy & Allen D. St. Simons Isl. SC June 2014
Plastic and composite Adirondack chairs have plenty of differences including the durability which they provide, the price, the maintenance they both require, and much more. Use the table of contents below for reference.
Right off the bat, there are a couple of differences between the composite and the plastic materials for Adirondack chairs. Composite is manufactured from a variety of materials including a wood fiber, a binding agent, and even some plastic! Composite is a material that is commonly used in furniture, flooring, and many other structures as well.
Plastic is a cost-efficient material that is commonly used in outdoor furniture because of its availability and price. Plastic Adirondack chairs can be a good solution for your outdoors if you are looking for something quick and inexpensive. That being said, plastic is much more likely to fall apart or break on you within a short period of time. Composite or poly Adirondack chairs is the way to go for a longer, more comfortable, and durable life.
Without a doubt, the composite Adirondack chair is a more durable chair than any plastic one. This is because of the durability of the material. Plastic is a much cheaper material and is much more common on cheap lounge chairs. That being said, you do need to pay for what you get. The cost of the composite will be significantly higher due to the lifetime and quality.
Maintaining both plastic and composite Adirondack chairs is not much harder than the other. A simple warm water and dish soap combination will do the trick for both materials. However, you may find yourself cleaning and taking care of the composite Adirondack chair more often because of the material. Since it is a more expensive and quality material, you may find yourself cleaning it more often than not. Other than occasional wiping, both chairs are easily maintainable.
Since composite is a more durable and sustainable material than plastic, it is also a more expensive material. Composite and plastic can range from many different prices. You can find a cheap plastic Adirondack chair for sale on Home Depot, Target, or any large retailer anywhere from $20 to $100. Take a look at some of the plastic Adirondack chairs below to get an idea of the price.
If you are someone who is looking for a short term outdoor chair on a budget, then a plastic Adirondack chair maybe for you. However, if you are someone who is looking for a long-term Adirondack chair, the poly Adirondack chair is for you. Explore the many options of composite Adirondack chairs and find which would best suit your home. 781b155fdc